SECTION 10 - ENGINE
10-28
12. Attach lifting chains to the engine lift eyes at 1,
and hook to the lifting device to support the
engine.
13. Remove the fuse panel support hardware and
move the panel for clearance.
14. Remove the engine motor mount hardware and
slide the engine to the rear to uncouple the
hydrostatic pump assembly from the engine
bellhousing. Lift the engine assembly from the
skid steer frame.
20
Op. 10 001 53
ENGINE DISASSEMBLY SEQUENCE
Op. 55 301 10
ALTERNATOR
Disconnect the alternator wire harness and wires, 1.
Remove the alternator pivot and adjusting bracket,
hardware, 2.
21
Op. 10 104 14
REMOVE COOLING FAN AND PULLEY
Remove the fan retaining hardware and spacers.
The LS160 N844 engine fan is equipped with a cover,
1, over the center of the fan.
22
To Next Page
Loading...
Need help?
General
