SECTION 88 - ACCESSORIES
88-27
Op. 88 000
SLOW-MOVING VEHICLE (SMV) SIGN KIT
The Slow-Moving Vehicle (SMV) kit mounts to the
rear door of the skid-steer loader when the loader is
operated on roadways.
On the louvered rear door, a bracket, 1, must be
installed to hold the SMV sign in place on top of the
door.
50
1. Attach the angle, 1, with one 5/16″ x 1-1/4″ car-
riage bolt from the kit and nut and M8 lock washer
previously removed at 2.
2. Attach the spade socket to the angle at 3 using
two 5/16″ x 1″ carriage bolts, M8 lock washers,
and nuts.
3. Assemble the SMV sign, 4, to the support, 5, us-
ing two #10 x 1/2″ machine screws and flange
nuts at 6.
4. Mount the SMV sign assembly in the spade sock-
et as shown at 7.
51
To Next Page
Loading...
Need help?
General
