New Holland LS160 User Manual

SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)
82-5
BOOM/CYLINDER PIVOT PINS SIZE
7
PART NUMBER A B C
9614349
95 mm (3-3/4I) 38 mm (1-1/2I)
86501420
49 mm (1-15/64I) 60.3 mm (2-3/8I) 113 mm (4-29/64I)
86501422
77 mm (3-1/32I) 60.3 mm (2-3/8I) 141 mm (5-9/16I)
86501430
72.3 mm (2-7/8I) 38.10 mm (1-1/2I) 112.5 mm (4-7/16I)
86501434
57.8 mm (2-9/32I) 38.1 mm (1-1/2I) 92 mm (3-5/8I)
86504316
40.0 mm (1-5/32I) 60.3 mm (2-3/8I) 113 mm (4-7/16I)
86521982
117 mm (4-39/64I) 38.1 mm (1-1/2I)
NOTE: After the tapered pivot pin retaining hardware
is torqued, the pins must be properly seated. Using
a hammer, strike the head of the bolt and pin several
times to seat the tapered pin in the taper of the boom
and/or ROPS. Retorque the hardware to the speci-
fied torque. Repeat this process until the torque is
maintained

New Holland LS160 Specifications

General

Brand	New Holland
Model	LS160
Category	Mini Skid Steers
Language	English