SECTION 82 - FRONT LOADER (BOOM AND MOUNTING PLATE)
82-15
BOOM LOCK PIN LINKAGE
Op. 82 100 77
REMOVAL
1. Lower the boom to the lowered position.
2. Open the rear door, 1, and the top engine, 2, ac-
cess cover.
3. Remove the right and left engine side covers, 3.
19985917
1
2
3
3
28
4. Unhook the spring, 1, from control rod by sliding
spring to the side and removing spring at bottom
hook, 2.
5. Remove the push nuts, 3, from the control rod, 4.
6. Remove the linkage to pin through bolt, 5.
7. Remove the linkage support retaining hardware,
6.
29
8. Remove the plastic handle grip, 1, from the con-
trol lever.
30
To Next Page
Loading...
Need help?
General
