11
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
11.17
DISPLAY UNITS (STANDARD/METRIC)
1. Press and hold the MODE button to enter the settings
menu.
2. Press either toggle button to cycle to the desired
“UNITS” option (distance, temperature or volume).
Press MODE to select.
3. Press either toggle button to cycle to the desired
setting.
4. Press MODE to save and exit to the settings menu.
TRIP METER
Use a trip meter to track
the distance traveled
during a specific trip or
period of time. Reset the
meter to zero before
traveling.
1. Press either toggle
button to cycle to the
desired trip meter
option (T1 or T2).
2. Press and hold either
toggle button until the
meter resets to zero.
TRIP TIME
Use a trip time meter to
track the travel time during
a specific trip. Reset the
meter to zero before
traveling.
1. Press either toggle
button to cycle to the
trip time option (TT).
2. Press and hold either
toggle button until the
meter resets to zero.
PROGRAMMABLE SERVICE INTERVAL
The service interval counter is programmed to 25 hours
at the factory. As hours of engine operation increase, the
counter decreases. The wrench icon will flash for about
10 seconds when the counter reaches zero (0), and each
time the key is turned on thereafter, until the counter is
reset.
When this feature is enabled, it provides a convenient
reminder to perform routine maintenance. Refer to the
Periodic Maintenance Chart for recommended service
intervals.
Use the following procedure to reset or change the
service interval.
1. Press and hold the
MODE button to enter
the settings menu.
2. Press either toggle
button to cycle to the
“Service Hours” option.
Press MODE to select.
3. Press MODE to reset
the existing value and
exit, or press either
toggle button to change
the value. Press MODE
to save and exit to the
settings menu.
ELECTRICAL
To Next Page
Loading...
Need help?
General
