Polaris RANGER XP 1000 2018 User Manual

2
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
2.33
ENGINE MAINTENANCE
ENGINE OIL LEVEL INSPECTION
This engine has a wet-sump design, meaning the engine
oil is contained in the bottom of the crankcase. To check
the oil level, follow the procedure listed below:
FLUID CAPACITY
Recommended Engine Oil:
Capacity: 2.5 Qt (2.4 L)
PS-4 5W-50 Full Synthetic
Ambient Temp Range: -35° F to 100° F
PS-4 10W-40 Extreme Duty Full Synthetic
Ambient Temp Range: 0° F to 120° F
1. Position vehicle on a level surface and place the
transmission in PARK.
2. Stop the engine and allow it to cool down before
removing the dipstick.
3. Raise the cargo box. Unlock the dipstick lever
q
.
Remove the dipstick and wipe it dry with a clean
cloth.
4. Reinstall the dipstick and push it into place. Do not
lock the dipstick.
NOTE
Make certain the dipstick is inserted all the way into the
dipstick tube to keep the depth of the dipstick
consistent.
5. Remove the dipstick and check the oil level.
6. Add the recommended oil as necessary to bring the
oil level within the SAFE range on dipstick. Do not
overfill (see NOTE below).
NOTE
A rising oil level between checks during cold weather
operation can indicate contaminants such as gas or
moisture collecting in the crankcase. If the oil level is
over the upper mark, change the oil immediately.
7. With the cargo box raised, add engine oil through the
oil fill cap
w
located on top of the valve cover, under
the cargo box.
8. When finished, reinstall dipstick and lock the lever.
Lower the cargo box and secure in position.
MAINTENANCE

Polaris RANGER XP 1000 2018 Specifications

General

Brand	Polaris
Model	RANGER XP 1000 2018
Category	Utility Vehicle
Language	English