M126/M127/M128 5-38 SM
Disk Test/Clean
 This test destroys all data on the disk and should not be attempted on a good disk. Also
note that this test may run approximately 1½ hours depending on the disk size.
To run the Disk Test/Clean Test:
1. Touch
to select "Disk Test/Clean" from the Device Tests menu.
"Contents will be lost. Continue?" message displays to warn the user that all contents on the
disk will be lost.
2. Touch "Yes" to continue and "No" to exit.
If "Yes" is selected, the following screen displays and updates periodically, indicating the
percentage of test completed.
The power indicator blinks during the test.
 The test can NOT be canceled.
3. Once the test is complete, the power indicator turns on solid, and either the message "Disk
Test/Clean Test Passed" or "Disk Test/Clean Failed" appears. If the message indicates failure,
the disk is unusable.
5.3.10 PRINTER SETUP
The triangles pointing up or down indicate whether there are additional menus. Touch the up or
down arrows to display these additional menus.
To Next Page
Loading...
Need help?
General
