To Next Page

To Previous Page

If the CD does not launch after a minute, then do the following:

a Click , or click Start and then click Run.

b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

2 Click Install Printer and Software.

3 Click Agree to agree to the License Agreement.

4 Select Suggested, and then click Next.

Note: To configure the printer using a static IP address, using IPv6, or to configure printers using scripts, select

Custom and follow the on-screen instructions.

5 Select Wired Network Attach, and then click Next.

6 Select the printer manufacturer from the list.

7 Select the printer model from the list, and then click Next.

8 Select the printer from the list of printers discovered on the network, and then click Finish.

Note: If your configured printer does not appear in the list of discovered printers, click Add Port and follow the

on-screen instructions.

9 Follow the on-screen instructions to complete the installation.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

2 Print the network setup page from the printer. For information on printing a network setup page, see “Printing a

network setup page” on page 51.

3 Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you

are configuring access for computers on a different subnet than the printer.

4 Install the drivers and add the printer.

a Install a PPD file on the computer:

1 Insert the Software and Documentation CD in the CD or DVD drive.

2 Double-click the installer package for the printer.

3 From the Welcome screen, click Continue.

4 Click Continue again after viewing the Readme file.

5 Click Continue after viewing the license agreement, and then click Agree to accept the terms of the

agreement.

6 Select a Destination, and then click Continue.

7 From the Easy Install screen, click Install.

8 Type the user password, and then click OK.

All the necessary software is installed on the computer.

9 Click Restart when installation is complete.

b Add the printer:

• For IP printing:

Additional printer setup

Ricoh M126 User Manual

Questions and Answers: