M126/M127/M128 6-8 SM
6.4 MESSAGES AND ERROR CODES
6.4.1 USER ATTENDANCE MESSAGES
The machine control panel displays messages describing the current state of the machine and
indicates possible machine problems that must be resolved. This topic provides a list of all
machine messages, explains what they mean, and tells how to clear the messages.
The following table lists the messages in alphanumerical order. A message can also be located
using the index.
User status and attendance messages
User primary message Explanation
Change <src><Custom
type name>
This IR allows a user to override the source for the
remainder of a job. The page will be printed as it is formatted
on the paper installed in the tray. This may cause clipping.
No further Change prompts will be posted for the remainder
of the current job.
The following actions can be taken:
 Change the paper source to a custom type / custom
string /source and size/ source, type, size.
 Continue the print job.
 Request more information.
 Use the current source.
 Reset the active.
 Wait fir supplies.
Change <src><Custom
String>
Change <src><size>
Change
<src><type><size>
Close Door Message clears when front door is closed.
Disk Corrupted.
Reformat?
This message appears if there is a corrupted hard disk.
Reformat the drive. If the message remains, replace the
disk.
Weblink server not setup.
Contact system
administrator
Web Link is being used for e-mail, and either the 'Server' or
'Web Link' fields are NULL in the Web Link Setup.
 The system administrator needs to configure the server.
To Next Page
Loading...
Need help?
General
