Ricoh M126 User Manual

M126/M127/M128 6-34 SM
Error Description Action
295.02 Scanner Disable Page at CCD
The ADF page gap is too small, not
enough room to accelerate after
pausing.
Remove paper from the ADF.
6.4.4 SERVICE ERROR CODES
Service error codes are generally non-recoverable except in an intermittent condition when the
machine can be put into POR to temporarily recover from the error condition.
Error Description Action
8XX Scanner service errors
840.01
Scanner
disabled
The scanner is disabled and can’t be
used.
Enter the configuration menu, and
re-enable the scanner
module(
p.6-86 "840.xx Service
Check").
840.02
Scanner
auto
disabled
The scanner is disabled and can’t be
used.
This message is posted when the
machine PORs. Enter the
configuration menu, and re-enable the
scanner module. (
p.6-86 "840.xx
Service Check").
841 Image Pipeline
Image pipeline ASIC (
p.6-90 "CCD
Service Check"). Also,Go to “Flatbed
Home Position Service Check” in
“Troubleshooting".
841.96 SIZAR out of band interrupt
842 Communication Failure
Communication failure. (
p.6-90
"CCD Service Check").
843
Scanner Failure - Carriage failed to
move to Home of desired position
Carriage mechanical failure (
p.6-90
"Flatbed Motor Service Check").
843.01 Scanner Failure
ADF mechanical failure (
p.6-94
"ADF Paper Jam Service Check").

Ricoh M126 Specifications

General

Brand	Ricoh
Model	M126
Category	Printer
Language	English