Maintenance
5.3.12 REPORTS
Menu settings page
This enables you to print the Menu Settings Page. The report prints the Diag Menu to include
Registration, Print Tests, Hardware Tests, Duplex Tests, Input Tray Tests, Output Bin Tests,
Device Tests, Printer Setup, EP Setup, Reports, Event Log, Development Menu, and Scanner
Tests.
5.3.13 EVENT LOG
Display log
The event log provides a history of errors. It contains the 12 most recent errors that have occurred
on the machine. The most recent error displays in position 1, and the oldest error displays in
position 12 (if 12 errors have occurred). If an error occurs after the log is full, the oldest error is
discarded. Identical errors in consecutive positions in the log are entered, so there may be
repetitions. All 2xx and 9xx error messages are stored in the event log.
To view the event log:
1. Touch
to select "Display Log" from EVENT LOG.
Up to three error codes display at a time. Touch
to display additional information, if
available.
2. Touch "Back" to return to the EVENT LOG menu.
Print log
Additional diagnostic information is available when you print the event log from the Diagnostics
Menu rather than the Configuration Menu.
The Event Log printed from the Diagnostics Menu includes:
 Detailed machine information, including code versions
 Time and date stamps
 Page counts for most errors
 Additional debug information in some cases
To Next Page
Loading...
Need help?
General
