8B-6 Air Bag System:
The air bag system is designed to activate only in severe
frontal and sideward collisions. It is not designed to
activate in rear impacts, rollovers, or minor frontal and
sideward collisions, since it would offer no protection in
those types of accidents.
Air Bag System Input / Output Table
S5JB0A8201002
There are two types of air bag system of this model
• Consisting of 4 items, i.e., air bags for driver and front passenger and seat belts with pretensioner for driver and
front passenger sides
• Consisting of 8 items, i.e., air bags for driver and front passenger, seat belts with pretensioner for driver and front
passenger sides, side-air bags for driver and front passenger and curtain-air bags for driver and front passenger
sides
The side-air bag and curtain-air bag on the same side deploy at the same time only when an impact is applied to
that side. For the details, refer to the table below.
I5JB0A820007-01
INPUT
Sensor in SDM and
forward-sensor
Driver side-air bag
and Driver side
curtain-air bag
Passenger side-air bag
and Passenger side
curtain-air bag
Driver side-sensor
Passenger side-sensor
OUTPUT
Signal from
sensor
Driver air bag, Passenger
air bag, Seat belt with
pretensioner (LH) and Seat
belt with pretensioner (RH)
I4RS0A820005-01
To Next Page
Loading...
Need help?
General
