Suzuki GRAND VITARA User Manual

3B-17 Differential: Front
27) Clean mating surface of right retainer, carrier (1) and
rear cover (2), apply sealant to carrier and rear cover
as shown in figure by such amount that its section is
1.5 mm (0.059 in.) in diameter, mate right retainer
with carrier and rear cover, and then tighten bolts to
specified torque.
“A”: Sealant 99000–31260 (SUZUKI Bond
No.1217G)
Tightening torque
Retainer bolt: 50 N·m (5.0 kgf-m, 36.5 lb-ft)
28) Clean mating surface of front drive shaft retainer,
carrier (1) and rear cover (2), apply sealant to carrier
and rear cover as shown in figure by such amount
that its section is 1.5 mm (0.059 in.) in diameter,
mate front drive shaft retainer with carrier and rear
cover, and then tighten bolts to specified torque.
“A”: Sealant 99000–31260 (SUZUKI Bond
No.1217G)
Tightening torque
Retainer bolt: 50 N·m (5.0 kgf-m, 36.5 lb-ft)
29) Install front drive shaft using plastic hammer.
30) Install front differential rear mounting (1).
Tightening torque
Rear mounting bracket bolt (a): 50 N·m (5.0 kgf-
m, 36.5 lb-ft)
31) Install front differential right mounting (1).
Tightening torque
Right mounting bracket bolt (b): 50 N·m (5.0 kgf-
m, 36.5 lb-ft)
Front Differential Inspection
S5JB0A3216011
• Check companion flange for wear or damage.
• Check bearings for wear or discoloration.
• Check differential carrier for cracks.
• Check drive bevel pinion and drive bevel gear for
wear or cracks.
• Check differential gears, pinions and pinion shafts for
wear or damage.
• Check differential gear spline for wear or damage.
1
“A”
2
I5JB0A321048-01
“A”
2
1
I5JB0A322014-01
(a)
1
I5JB0A321046-01
1
(
b
)
I5JB0A321047-02

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English