Engine Mechanical: For M16A Engine with VVT 1D-11
Throttle Body and Intake Manifold Components
S5JB0A1416009
Throttle Body On-Vehicle Inspection
S5JB0A1416005
Check electric throttle body assembly referring to “Throttle Valve Operation Check” and “Electric Throttle Body
Assembly Operation Check” under “Electric Throttle Body Assembly On-Vehicle Inspection: in Section 1C”.
I5JB0A141005-05
[A]: Installing location of intake manifold bolt and nut 7. EVAP canister purge valve 14. Intake manifold bolt (short)
1. Intake manifold 8. EVAP canister purge valve hose 15. Intake manifold bolt (long)
2. Gasket 9. MAP sensor bolt 16. To delivery pipe
3. Electrical throttle body 10. To EGR valve : 5 N⋅m (0.5 kgf-m, 4.0 lb-ft)
4. EGR pipe 11. To PCV valve : Do not reuse.
5. MAP sensor 12. To brake booster
6. PCV hose 13. Intake manifold nut