Engine Lubrication System: For M16A Engine with VVT 1E-7
Oil Pump Components
S5JB0A1516004
Oil Pump Removal and Installation
S5JB0A1516005
Oil pump is incorporated with timing chain cover.
For removal and installation, refer to “Timing Chain
Cover Removal and Installation: For M16A Engine with
VVT in Section 1D”.
Oil Pump Disassembly and Reassembly
S5JB0A1516006
Disassembly
1) Remove rotor plate (1) by removing its mounting
bolts.
2) Remove outer rotor (1) and inner rotor (2).
3) Remove relief valve (1), spring (2) and retainer (3) by
removing circlip (4).
I4RS0A150010-01
1. Rotor plate 6. Rotor plate bolt 10. Circlip
2. O-ring 7. Relief valve : 11 N⋅m (1.1 kgf-m, 8.0 lb-ft)
3. Outer rotor 8. Spring : Do not reuse.
4. Inner rotor 9. Retainer : Apply thin coat of engine oil to sliding surface.
5. Timing chain cover 10. Circlip
I2RH0B150018-01
I2RH0B150019-01
I2RH0B150020-01
To Next Page
Loading...
Need help?
General
