Rear Brakes: 4C-5
Rear Brake Shoe Removal and Installation
S5JB0A4306006
WARNING
!
Use special care when installing brake shoe
return spring. Failure in its proper installation
may allow it to springback and cause
personal injury.
Removal
1) Remove brake drum referring to “Rear Brake Drum
Removal and Installation: ”.
2) Fully turn adjuster (1) to reduce brake shoe adjuster.
3) Remove shoe hold down springs (1) by turning shoe
hold down pins (2).
4) Remove upper shoe return spring (1), brake adjuster
(2), adjuster pawl lever (3) and spring.
5) Remove brake shoes (4) and lower shoe return
spring (5).
6) Disconnect parking brake shoe lever (1) from
parking brake cable (2).
7) Remove push nut (1).
8) Remove parking brake shoe lever (2) from brake
shoe (3).
Installation
1) Assemble parts in reverse order of removal
procedure.
2) Before install brake shoe, be sure to fully turn brake
adjuster to reduce.
3) Install shoe hold down springs (1) by pushing them
down in place and turning hold down pins (2).
2. Adjuster pawl lever
1
2
1
I5JB0A430019-01
I2RH01430012-01
3
2
4
1
4
5
I5JB0A430006-01
I2RH01430013-01
2
3
1
I5JB0A430007-01
I5JB0A430010-01
To Next Page
Loading...
Need help?
General
