Suzuki GRAND VITARA User Manual

Automatic Transmission/Transaxle: 5A-95
Transmission Control Module (TCM) Removal
and Installation
S5JB0A5106064
CAUTION
!
TCM consists of highly precise parts, so
when handling it, be careful not to expose it
to excessive shock.
Removal
1) Disconnect negative cable at battery.
2) Disable air bag system.
Refer to “Disabling Air Bag System: in Section 8B”.
3) Remove glove box.
4) Disconnect connectors from TCM (1).
5) Remove TCM with 4WD control module by removing
its nuts, and then separate TCM and 4WD control
module.
Installation
Reverse removal procedure noting the following points.
• Connect TCM connectors securely.
• Be sure to enable air bag system after TCM is back in
place. Refer to “Enabling Air Bag System: in Section
8B”.
A/T Relay Inspection
S5JB0A5106092
1) Disconnect negative cable at battery.
2) Remove integration relay No.2 (1) from fuse box
No.2 (2).
3) Check that there is no continuity between terminals
“E41-1” and “E38-8”.
If there is continuity, replace relay.
4) Connect battery positive (+) terminal to terminal
“E38-6” of relay. Connect battery negative (–)
terminal to terminal “E38-7” of relay. Check for
continuity between terminal “E41-1” and “E38-8”. If
there is no continuity when relay is connected to the
battery, replace integration relay No.2.
1
I5JB0A510061-01
2
1
I5JB0A130031-02
1
1
2345678 12345678
E41E41E41 E37E38
“E38-6”
“E41-1”
“E38-7”
“E38-8”
I5JB0A510159-01

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English