Automatic Transmission/Transaxle: 5A-87
Brake and key Interlock System Inspection
S5JB0A5106052
1) Check that selector lever cannot be moved to any
other range from “P” range position when ignition
switch key is at ACC position, at LOCK position or it
is removed from keyhole of ignition switch, or brake
pedal is not depressed.
2) Shift select lever to “P” range position, release knob
button and check for the following.
• Ignition key can be turned between LOCK and
ACC positions back and forth and also it can be
removed from ignition switch.
• With shift lock solenoid release button (1) pushed
and ignition key turned to ACC position, selector
lever can be shifted from “P” range position to any
other range.
• For LH steering vehicle, remove manual release
button hole cover (1). With shift lock solenoid
release button pushed by key or flat end rod and
ignition key turned to LOCK position, selector
lever can not be shifted from “P” range position to
any other range.
• For RH steering vehicle, with shift lock solenoid
release button (1) pushed and ingition key turned
to LOCK position, selector lever can not be shifted
from “P” range position to any other range.
• When ignition switch is turned ON and brake
pedal is depressed, selector lever can be shifted
from “P” range position to any other range.
3) With ignition lever shifted to any position other than
“P” range, check that ignition key cannot be turned
LOCK position and it cannot be removed from
ignition switch unless it is at LOCK position.
I5JB0A510165-01
I5JB0A510166-01
1
I5JB0A510167-01
1
I5JB0A510168-01
I5JB0A510169-01
I5JB0A510170-01
To Next Page
Loading...
Need help?
General
