Suzuki GRAND VITARA User Manual

5A-126 Automatic Transmission/Transaxle:
Valve Body Assembly Components
S5JB0A5106087
Automatic Transmission Unit Assembly
S5JB0A5106088
CAUTION
!
When replacing pressure control solenoid
valve and/or TCC pressure control solenoid
valve, it is strictly required to replace it
together with valve body assembly as a set.
Replacing pressure control solenoid valve
and/or TCC pressure control solenoid valve
independently may cause excessive shift
shock.
1) Measure inside diameter of transmission case
bushing. If inside diameter exceeds limit, replace
transmission case.
Transmission case bushing inside diameter
standard
38.113 – 38.138 mm (1.5005 – 1.5015 in.)
2) After applying A/T fluid to new O-rings, install them
to reverse brake piston (3), reaction sleeve (2) and
secondary reverse piston (1).
6
11
5
4
1
8
13
3
2
9
10
7
(a)
11
(a)
(a)
12
(a)
I5JB0A510127-01
1. Manual valve 5. Plate 9. Solenoid clamp 13. Valve body assembly
2. TCC control solenoid valve 6. Shift solenoid valve A 10. Solenoid clamp bolt : 5.5 N⋅m (0.55 kgf-m, 4.0 lb-ft)
3. Pressure control solenoid valve 7. Shift solenoid valve B 11. Shift solenoid bolt
4. Detent spring 8. Over drive (O/D) brake apply
tube
12. Detent spring bolt
I5JB0A510129-01
IYSQ01510236-01

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English