3A-2 Drive Shaft / Axle: Front
Repair Instructions
Front Drive Shaft Boot and Joint Check
S5JB0A3116001
• Check boot for tear. If even a small tear is found, replace with new one.
• Check drive shaft joint for wear, breakage, and any other damage. Replace if any abnormality is found.
Front Drive Shaft Components
S5JB0A3116002
I5JB0A311001-01
I5JB0A311002-03
[A]: Right side drive shaft assembly 4. Boot band (Large) 9. Drive shaft nut
: After tightening nut, caulk nut
securely.
[B]: Left side drive shaft assembly 5. Boot (Differential side) 10. Front drive shaft flange nut
1. Circlip 6. Boot band (Small) : 200 Nâ‹…m (20.0 kgf-m, 145.0 lb-ft)
2. Differential side joint (Constant velocity tripod joint)
: Apply yellow grease included in spare part to joint.
7. Wheel side joint assembly (Constant velocity
ball joint)
: Never disassemble.
:80 Nâ‹…m (8.0 kgf-m, 58.0 lb-ft)
3. Snap ring 8. Tripod joint spider : Do not reuse.
To Next Page
Loading...
Need help?
General
