Suzuki GRAND VITARA User Manual

Front Brakes: 4B-8
Piston Seal
Excessive or uneven wear of pad lining may indicate
unsmooth return of the piston. In such a case, replace
rubber seal.
Front Brake Disc Removal and Installation
S5JB0A4206008
Removal
1) Hoist vehicle and remove front wheel.
2) Remove caliper assembly (2) by loosening caliper
carrier bolts (1) (2 pcs).
CAUTION
!
During removal, be careful not to damage
brake flexible hose and not to depress brake
pedal.
NOTE
Hang removed caliper with a wire hook or the
like so as to prevent brake hose from
bending and twisting excessively or being
pulled.
3) Remove disc by using 8 mm bolts (1) (2 pcs).
Installation
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Tighten caliper carrier bolts (1) to specification.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
4) Tighten front wheel nuts to specifications.
Tightening torque
Wheel nut (a): 100 N·m (10.0 kgf-m, 72.5 lb-ft)
5) Upon completion of installation, perform brake test.
Front Brake Disc Inspection
S5JB0A4206009
Inspect front brake disc, referring to “Front Brake Disc
and Pad Inspection: ”.
IYSQ01420023-01
1
2
I5JB0A420010-01
IYSQ01420025-01
1,(a)
I5JB0A420011-01
IYSQ01220010-01

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English