Engine Mechanical: For M16A Engine with VVT 1D-9
Air Cleaner Filter Inspection and Cleaning
S5JB0A1416002
Inspection
Check air cleaner filter for dirt. Replace excessive dirty
filter.
Cleaning
Blow off dust by compressed air from air outlet side of
element.
Cylinder Head Cover Removal and Installation
S5JB0A1416011
Removal
1) Disconnect negative cable at battery.
2) Disconnect MAF sensor coupler (1).
3) Remove air cleaner case (2).
4) Remove cylinder head upper cover.
5) Disconnect ignition coil couplers (1).
6) Remove ignition coil assemblies (2) with high-
tension cord (3).
7) Remove wire harness clamp from cylinder head
cover.
8) Remove oil level gauge (1).
9) Disconnect PCV hose (2) from PCV valve (3) and
disconnect breather hose (4) from cylinder head
cover.
10) Remove cylinder head cover mounting bolts in such
order as indicated in the figure.
11) Remove cylinder head cover (1) with cylinder head
cover gasket (2) and spark plug hole gasket (3).
Installation
1) Install new spark plug hole gaskets (1) and new
cylinder head cover gasket (2) to cylinder head cover
(3) as shown in the figure.
I2RH0B140150-01
2
1
I5JB0A141004-02
I2RH0B140032-01
I5JB0A141006-01
I2RH0B140034-01
I2RH0B140035-01
To Next Page
Loading...
Need help?
General
