3C-2 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
The transfer has such a selective mechanism as to enable the shift actuator to make selection of high speed (direct
connection with transmission output: main shaft), low speed (speed reduction by input gear, counter gear and low
gear) or neutral by way of the reduction shift sleeve located between the input gear and low gear, and selection of
center differential lock or not by way of the differential lock clutch sleeve located at the center of the rear output shaft.
The case has an oil pump to provide proper lubrication.
Transfer Shift Control System Components
S5JB0A3311001
6
7
5
1
8
2
3
4
I5JB0A332001-01
To Next Page
Loading...
Need help?
General
