9C-19 Instrumentation / Driver Info. / Horn:
Front Speaker Removal and Installation
S5JB0A9306020
Removal
1) Remove door trim referring to Step 1) to 3) of “Front
Door Glass Removal and Installation: in Section
9E”.
2) Remove 3 front speaker mounting screws (1).
3) Remove front speaker (2) from front door (3).
4) Disconnect front speaker coupler from front speaker
(2).
Installation
Reverse removal procedure.
Rear Speaker Removal and Installation (5 Door
Model)
S5JB0A9306021
Removal
1) Remove door trim referring to Step 1) to 3) of “Rear
Door Glass Removal and Installation: in Section
9E”.
2) Remove 3 rear speaker mounting screws (1).
3) Remove rear speaker (2) from rear door (3).
4) Disconnect rear speaker coupler from rear speaker
(2).
Installation
Reverse removal procedure.
Rear Speaker Removal and Installation (3 Door
Model)
S5JB0A9306027
Removal
1) Remove right and left lower anchor bolts (2) from
body panel.
2) Remove quarter lower trim (1).
3) Remove 3 rear speaker mounting screws (1) and
rear speaker (2) from quarter panel.
4) Disconnect rear speaker coupler from rear speaker
(2).
Installation
Reverse removal procedure noting the following.
• Tighten lower anchor bolts to specified torque.
Tightening torque
Lower anchor bolt (a): 35 N·m (3.5 kgf-m, 25.5 lb-ft)
1
2
3
I4RS0A930027-01
1
2
3
I4RS0A930027-01
1
2
I5JB0A930020-02
2
1
I5JB0A930021-02
(a)
I5JB0A930022-02