Suzuki GRAND VITARA User Manual

3C-28 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
DTC C1214: Transfer Switch Circuit Short
S5JB0A3314042
Wiring Diagram
DTC Detecting Condition and Trouble Area
3 Transfer switch check
1) Check transfer switch referring to “Transfer Switch
Inspection: Motor-Shift Type (Transfer with Shift
Actuator)”.
Is switch in good condition?
Substitute a known-
good 4WD control
module and recheck.
Replace transfer switch.
4 Wire harness check
1) Disconnect connector from 4WD control module
connector “E91” with ignition switch OFF.
2) Check for open and high resistance in related circuits.
• Between “G59-2” terminal of transfer switch connector
and “E91-18” terminal of 4WD control module
connector
• Between “G59-3” terminal of transfer switch connector
and “E91-19” terminal of 4WD control module
connector
• Between “G59-4” terminal of transfer switch connector
and “E91-20” terminal of 4WD control module
connector
Are they in good condition?
Substitute a known-
good 4WD control
module and recheck.
Repair circuit.
Step Action Yes No
E91-18
E91-19
E91-20
BLU/ORN
BLU/BLK
LT GRN
1
2
12V
G59-4
G59-3
G59-2
1
2
3
45
6
7
891011
12
13
14
1516
1718
19
20
21
22
23
24
25
26
[A]
1
2
3
4
5
6
[B]
I5JB0A332016-01
[A]: 4WD control module connector “E91” (viewed from harness side) 1. 4WD control module
[B]: Transfer switch connector “G59” (viewed from harness side) 2. Transfer switch
DTC detecting condition Trouble area
Transfer switch combination different from specification is
detected for more than 0.5 seconds.
• Transfer switch
• Transfer switch circuit
• 4WD control module

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English