Suzuki GRAND VITARA User Manual

8B-102 Air Bag System:
3) Remove passenger air bag (inflator) module (1) from
instrument panel as shown.
WARNING
!
• When carrying a live air bag (inflator)
module, make sure the bag opening is
pointed away from you.
Never carry air bag (inflator) module by
wires or connector on the side of the
module. In case of an accidental
deployment, the bag will then deploy with
minimal chance of injury.
• As the live passenger air bag (inflator)
module must be kept with its bag (trim
cover) facing up while being stored or left
standing. This is necessary so that a free
space is provided to allow the air bag to
expand in the unlikely event of accidental
deployment.
• Observe “Precautions on Handling and
Storage of Air Bag System Components: ”
for handling and storing it.
Otherwise, personal injury may result.
Installation
1) Install passenger air bag (inflator) module (1) to
instrument panel as shown.
2) Tighten passenger air bag (inflator) module attaching
bolts (2) to specified torque.
Tightening torque
Passenger air bag (inflator) module attaching
bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
3) Connect passenger air bag (inflator) module
connector (1) securely as shown in figure.
a) Connect connector.
b) Lock connector with lock button (2).
4) Enable air bag system. Refer to “Enabling Air Bag
System: ”.
“A”
“A”
“A”
“A”
1
I5JB0A820081-01
“A”
“A”
“A”
“A”
2, (a)
1
I5JB0A820082-01
2
1
b)
a)
I5JB0A820083-01

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English