Suzuki GRAND VITARA User Manual

Front Suspension: 2B-21
6) Tighten suspension frame mounting bolts (1) and
engine front body side mounting nuts (2) to specified
torque.
CAUTION
!
If reuse suspension frame mounting bolt,
apply engine oil to thread, bearing and trunk
surface.
Tightening torque
Suspension frame mounting bolt (a): 135 N·m (
13.5 kgf-m, 98.0 lb-ft)
Engine front body side mounting nut (b): 55 N·m
(5.5 kgf-m, 40.0 lb-ft)
7) Remove chain hoist from engine and the rope (1)
from the radiator (2).
8) Install hood referring to “Hood Removal and
Installation: in Section 9J”.
9) Install front propeller shaft referring to “Propeller
Shaft Removal and Installation: in Section 3D”.
10) Tighten pipe bracket (1) bolts to specified torque and
then insert low pressure return hose (2) to low
pressure return pipe (3).
Tightening torque
Pipe bracket bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
11) Tighten union gear box bolt (1) to specified torque.
Tightening torque
Union gear box bolt (a): 35 N·m (3.5 kgf-m, 25.5
lb-ft)
12) Connect steering lower shaft from pinion shaft
Steering referring to “P/S Gear Case Assembly
Removal and Installation: in Section 6C”.
13) Connect front height sensor connector (1) (if
equipped with head light auto leveling system) and
then detach clip (2).
2,(b)
1,(a)
I5JB0A220053-01
1
2
I5JB0A220046-01
1
23
I5JB0A220044-01
1,(a)
I5JB0A220054-01
1
2
I5JB0A220043-01

Suzuki GRAND VITARA Specifications

General

Brand	Suzuki
Model	GRAND VITARA
Category	Automobile
Language	English