Automatic Transmission/Transaxle: 5A-19
Step 1. Customer Complaint Analysis
Record details of the problem (failure, complaint) and how it occurred as described by the customer.
For this purpose, use of such a inspection form will facilitate collecting information to the point required for proper
analysis and diagnosis.
Customer problem inspection form (example)
10 ) Check for intermittent problem
1) Check for intermittent problem.
Is there any faulty condition?
Repair or replace
malfunction part(s).
Go to Step 11.
Go to Step 11.
11 ) Final confirmation test
1) Clear DTC if any.
2) Perform final confirmation test.
Is there any problem symptom, DTC or abnormal condition?
Go to Step 6. End.
Step Action Yes No
I5JB0A510015-01