1B-2 Emission Control Devices:
Repair Instructions
Crankcase Breather (PCV) Hose Inspection
B827H11206001
Inspect the PCV hose in the following procedures:
1) Remove the right side cover. Refer to “Exterior Parts
Removal and Installation in Section 9D (Page 9D-
3)”.
2) Inspect the PCV hose (1) for wear or damage. If it is
worn or damaged, replace the PCV hose with a new
one.
Check that the PCV hose (1) is securely connected.
Crankcase Breather (PCV) Hose Removal and
Installation
B827H11206002
Removal
1) Remove the right side cover. Refer to “Exterior Parts
Removal and Installation in Section 9D (Page 9D-
3)”.
2) Disconnect the PCV hose (1).
Installation
Install the PCV hose in the reverse order of removal.
1
I827H1120002-02
1
I827H1120002-02
To Next Page
Loading...
Need help?
General
