Lock fuel return line
– After fuel return line has been pushed on completely, press
locking pin downwards -arrow-.
Tightening sequence
– Screw on cylinder head cover hand-tight in the sequence -1
to 7.-
– Tighten bolts to 10 Nm in the sequence -1...7-.
1.3.1 Removing and installing cylinder head cov-
er
Special tools and workshop equipment required
â—† Torque wrench -V.A.G 1410-
3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
196
Repair Group 15 - Cylinder head, valve gear
To Next Page
Loading...
Need help?
General
