1.4.2 Connecting test box -V.A.G 1598/42- using
adapter cable -V.A.G 1598/39-2-
Special tools and workshop equipment required
◆ Test box -V.A.G 1598/42-
◆ Adapter cable -V.A.G 1598/39-2-
Prerequisites
● Ignition switched off.
● All electrical consumers must be switched off.
Procedure
– Pull 94-pin connector off engine control unit -J623-.
– Using adapter cable -V.A.G 1598/39-2-, connect test box
-V.A.G 1598/42- to wiring harness of engine control unit and
to -connections A and B- of test box. The engine control unit
is not connected by this action.
2 Event memory
2.1 Reading event memory
Procedure for reading event memory
– Allow engine to idle.
3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
26
Repair Group 01 - Vehicle self-diagnosis
To Next Page
Loading...
Need help?
General
