â—† Petrol engines, 30 Nm
â—† Diesel engines, 30 Nm
Caution
â—† Torque specifications must not be exceeded.
â—† Excessive torque can cause leaks in the area of the oil
drain plug or even damage.
1.2.2 Renewing engine oil filter, engine codes
CJDA, CJDD, CPYA, CPYB, CPYC, CPYD,
CPYE
Removing
Note
â—† Observe environmental regulations for disposal.
â—† Oil new O-rings before installing.
– Unclip solenoid changeover valve -1-.
– Loosen sealing cap -2- using, for example, a suitable ring
spanner or socket.
Note
Before draining or extracting, loosen sealing cap so that the en-
gine oil can flow out of the filter housing.
– Clean sealing surfaces on threaded cap and oil filter hous-
ing.
3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
246
Repair Group 17 - Lubrication
To Next Page
Loading...
Need help?
General
