1.9.2 Engine codes CPYA, CPYB, CPYC, CPYD, CPYE
Special tools and
workshop equipment
required
◆ Refractometer
-T10007-
◆ Hose clamps up to
25 mm -3094-
◆ Cooling system tester
-V.A.G 1274-
◆ Adapter for cooling
system tester
-V.A.G 1274/8-
◆ Spring-type clip pliers
-VAS 5024 A-
◆ Drip tray -V.A.G 1306-
or drip tray for work-
shop hoist -VAS 6208-
◆ Torque wrench (5…50 Nm) -V.A.G 1331-
Not illustrated
◆ Expansion tank 1K0 121 407 A or expansion tank
1J0 121 407 B
◆ Plug 191 211 343
◆ Cap 1J0 121 324
◆ Coolant hose 251 265 056
Prerequisites:
● Engine cold
Test procedure
– Drain coolant ⇒ Page 284.
– Loosen hose clip on engine oil cooler with spring-type clip
pliers -VAS 5024 A-.
3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
296
Repair Group 19 - Cooling
To Next Page
Loading...
Need help?
General
