1.5 Draining and filling coolant
Special tools and
workshop equipment
required
◆ Refractometer
-T10007-
◆ Adapter -V.A.G 1274/8-
◆ Drip tray -V.A.G 1306-
or drip tray -VAS 6208-
◆ Torque wrench (5…50
Nm) -V.A.G 1331-
◆ Spring-type clip pliers
-VAS 5024-
Not illustrated:
◆ Cooling system charge unit -VAS 6096 -
◆ Coolant additive G 12 - according to TL “VW 774 F”
Draining ⇒ Page 284.
Filling ⇒ Page 285.
1.5.1 Draining
– Make sure to catch any escaping coolant. Place a drip tray
-V.A.G 1306- or drip tray -VAS 6208- under locations where
coolant may escape.
– Open cap on coolant expansion tank.
3
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
284
Repair Group 19 - Cooling
To Next Page
Loading...
Need help?
General
