Removing and installing oil level and oil temperature send-
er -G266-, if fitted
1 - Bolt, 10 Nm, self-locking, renew
2 - Seal; renew
3 - Electrical connector
4 - Oil level and oil temperature sender -G266-
2.2 Removing and installing sump
Note
â—† The repair work described in this chapter must be carried out
in a Volkswagen dealership only. Go to a Volkswagen deal-
ership.
â—† If these instructions are not adhered to and damage results,
Volkswagen is exempt from any liability and warranty claims.
WARNING
Adhere to the general safety regulations and the notes on
repair work on the engine! ⇒ Page 1
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
3
2 Parts of lubrication system
257
To Next Page
Loading...
Need help?
General
