Note
◆ Engine is not to be rotated for approx. 30 minutes after in-
stalling camshafts. The hydraulic compensation elements
must settle (otherwise valves will strike pistons).
◆ After working on the valve gear, turn the engine carefully at
least 2 rotations to ensure that none of the valves make con-
tact when the starter is operated.
2.4 Removing and installing camshaft
Special tools and
workshop equipment
required
◆ Diesel injection pump
locking pin -3359-
◆ Counterhold -T10051-
◆ Puller -T10052-
◆ Camshaft fitting tool
-T40094-
◆ Camshaft clamping tool
-T40095-
◆ Camshaft fitting tool
-T40096-
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
3
2 Repairing valve gear
233
To Next Page
Loading...
