Installing
– Renew filter element -3-.
– Renew O-rings -2- and -4-.
– Install threaded cap, and tighten it to 25 Nm.
Further assembly is basically the reverse of the dismantling se-
quence. Make sure that the solenoid changeover valve -1- can
be heard to engage.
Caution
Only engine oils approved by VW may be used.
Note
In this case, use engine oil which is in accordance with the en-
gine oil standard 507 00
1)
.
1.2.3 Replenishing engine oil
Engine oil specifications and engine oil capacity:
Note
â—† Depending on the installation position of the engine, the re-
quired engine oil capacity may be different.
â—† Therefore, also observe the specifications of the machine
manufacturer.
Engine codes With oil filter
change
Engine oil specifi-
cations
CJDA 4.3 l 507 00
CJDD 4.3 l 507 00
CPYA 4.3 l 507 00
CPYB 4.3 l 507 00
CPYC 4.3 l 507 00
1)
Combi product: 504 00 / 507 00
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
3
1 Engine oil
247
To Next Page
Loading...
Need help?
General
