WARNING
Engine oil can ignite if it comes in contact with hot en-
gine components. This may cause fire, burns and other
serious injuries.
◆ Always make sure that the cap of the engine filler
opening is securely closed after refilling. This will
prevent the engine oil from draining out on to hot en-
gine components when the engine is running.
Note
◆ Do not start the engine if the engine oil level is above seg-
ment -A-. Seek expert assistance. The catalytic converter
and the engine could otherwise be damaged.
◆ When refilling or changing service fluids, make sure that the
contents of the containers are correct. Incorrect service flu-
ids can cause serious functional problems and damage to
the engine.
◆ The engine oil level must never be above segment -A-. Oth-
erwise, engine oil could be drawn in through the crankcase
breather and escape into the atmosphere via the exhaust
system.
2 Parts of lubrication system
Caution
Finding metal shavings or a large quantity of small metal
particles during engine repair could indicate that the crank-
shaft bearings or conrod bearings are damaged. To prevent
this from causing further damage, perform the following re-
pairs:
Thoroughly clean oil passages,
Renew oil spray jets,
Renew oil cooler,
Renew oil filter element.
Industriemotoren - Industrial Engines 2009 ▶
Workshop Manual for Diesel Engine (2.0 l/36-75 kW_EA 189) 05.2015
3
2 Parts of lubrication system
249
To Next Page
Loading...
