ABB ACS320 User Manual

Program features 101
 Contents of the assistant displays
There are two types of displays in the Start-up assistant: Main displays and the
information displays. The main displays prompt the user to feed in information. The
assistant steps through the main displays. The information displays contain help texts
for the main displays. The figure below shows a typical example of both and
explanations of the contents.
Timed functions Setting the timed functions Group 36: Timed functions
Selecting the timed start/stop control for
external control locations EXT1 and EXT2
1001, 1002
Selecting timed EXT1/EXT2 control 1102
Activation of timed constant speed 1 1201
Selecting timed function status indicated
through relay output RO
1401
Selecting timed PID1 parameter set 1/2
control
4027
Name Description Set parameters
Main display Information display
1
2
1 Parameter Help text …
2 Feed-in field … help text continued
9905 MOTOR NOM VOLT
EXIT SAVE
00:00
LOC
PAR EDIT
220 V
Set exactly as given
on the motor
nameplate
If connected to
multiple motors
EXIT
00:00
LOC
HELP

ABB ACS320 Specifications

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)