ABB ACS320 User Manual

82 Application macros
Application / Macro listing
This section describes the following macros:
9902
value
Macro
9902
value
Macro
1 HVAC DEFAULT (page 83) 9 INT TIMER CS (page 91)
2 SUPPLY FAN (page 84)
10 FLOATING PNT (page 92)
3 RETURN FAN (page 85)
11 DUAL SETPPID (page 93)
4 CLNG TWR FAN (page 86)
12 DUAL SP PID WITH CS (page 94)
5 CONDENSER (page 87)
13 E-BYPASS (page 95)
6 BOOSTER PUMP (page 88)
14 HAND CONTROL (page 96)
7 PUMP ALTERNA (page 89)
15 E-CLIPSE (page 97)
8 INT TIMER (page 90)
21 AC500 MODBUS (page 98)

ABB ACS320 Specifications

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)