To Next Page

To Previous Page

360 Fault tracing

Fault history

When a fault is detected, it is stored in the Fault history. The latest faults are stored

together with the time stamp.

Parameters 0401 LAST FAULT, 0412 PREVIOUS FAULT 1 and 0413 PREVIOUS

FAULT 2 store the most recent faults. Parameters 0404…0409 show drive operation

data at the time the latest fault occurred. The Assistant control panel provides

additional information about the fault history. See section Fault logger mode on page

70 for more information.

Other manuals for ABB ACS320

Questions and Answers:

Need help?

Do you have a question about the ABB ACS320 and is the answer not in the manual?

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)