ABB ACS320 User Manual

Introduction to the manual 21
Related documents
See List of related manuals on page 2.
Categorization by frame size
The ACS320 drive is manufactured in frame sizes R0…R4. Some instructions and
other information which only concern certain frame sizes are marked with the symbol
of the frame size (R0…R4). To identify the frame size of your drive, see the table in
section Ratings on page 384 or in section Definitions on page 385.

ABB ACS320 Specifications

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)