To Next Page

To Previous Page

34 Mechanical installation

 Fasten clamping plates

1. Fasten the clamping plate to the plate at the bottom of the drive with the provided

screws.

2. For frame sizes R0…R2, fasten the I/O clamping plate to the clamping plate with

the provided screws.

Other manuals for ABB ACS320

Questions and Answers:

Need help?

Do you have a question about the ABB ACS320 and is the answer not in the manual?

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)