ABB ACS320 User Manual

402 Technical data
For fulfilling the requirements of the standard, see section Compliance with
EN 61800-3:2004 on page 399.
RoHS marking
The RoHS mark is attached to the drive to verify that drive follows the provisions of
the European RoHS Directive. RoHS = the restriction of the use of certain hazardous
substances in electrical and electronic equipment.

ABB ACS320 Specifications

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)