ABB ACS320 User Manual

Program features 129
 Settings
 Diagnostics
Parameter Additional information
Group 13: Analogue inputs Analog input settings
Group 15: Analogue outputs Analog output settings
Group 35: Motor temp meas Motor temperature measurement settings
Other
At the motor end the cable shield should be grounded through a 10 nF capacitor. If this is not
possible, the shield is to be left unconnected.
Actual value Additional information
0145 Motor temperature
Alarm/Fault Additional information
MOTOR TEMP/MOT OVERTEMP Excessive motor temp

ABB ACS320 Specifications

General

Overload Capacity	150% for 60 seconds
IP Rating	IP20
Frame Size	R1 to R3
Enclosure Rating	IP20
Frequency Range	0 to 500 Hz
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overload, Short circuit, Ground fault, Overtemperature
Fieldbus Communication	Modbus RTU, PROFIBUS DP, CANopen
Communication Interfaces	RS485
Operating Temperature	-10 to +50 °C (14 to 122 °F)
Storage Temperature	-40°C to +70°C
Humidity	Less than 95% (non-condensing)
Supply Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Input Voltage	200 V to 240 V (±10%), 380 V to 480 V (±10%)