Fortinet FortiGate Series Administration Guide

Replacement messages System Config
FortiGate Version 4.0 MR1 Administration Guide
252 01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
Figure 116: Replacement messages list
Changing replacement messages
To change a replacement message list go to System > Config > Replacement Message.
Use the expand arrows to view the replacement message that you want to change. You
can change the content of the replacement message by editing the text and HTML codes
and by working with replacement message tags. For descriptions of the replacement
message tags, see Table 39 on page 262.
Name The replacement message category. Select the expand arrow to expand or collapse
the category. Each category contains several replacement messages that are used
by different FortiGate features. The replacement messages are described below.
Description A description of the replacement message.
Edit or view
icon
Select to change or view a replacement message.
Reset icon Only appears on the a VDOM replacement message list. Select to revert to the
global version of this replacement message.
Edit
Reset
Note: FortiOS uses HTTP to send the Authentication Disclaimer page for the user to accept
before the firewall policy is in effect. Therefore, the user must initiate an HTTP traffic first in
order to trigger the Authentication Disclaimer page. Once the Disclaimer is accepted, the
user can send whatever traffic is allowed by the firewall policy.

Fortinet FortiGate Series Specifications

General

Brand	Fortinet
Model	FortiGate Series
Category	Firewall
Language	English