Fortinet FortiGate Series Administration Guide

Dynamic routing for IPv6 traffic What’s new in FortiOS Version 4.0 MR1
FortiGate Version 4.0 MR1 Administration Guide
62 01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
config redistribute
Use this subcommand to redistribute routes learned from OSPF, BGP, static routes, or a
direct connection to the destination network.
The RIPng redistribution table contains four static entries. You cannot add entries to the
table. The entries are defined as follows:
• bgp — Redistribute routes learned from BGP.
• connected — Redistribute routes learned from a direct connection to the destination
network.
• ospf — Redistribute routes learned from OSPF.
• static — Redistribute the static routes defined in the FortiGate unit routing table.
When you enter the subcommand, end the command with one of the four static entry
names (that is, config redistribute {bgp | connected | ospf | static}).
get router info6 {bgp | ospf | protocols | rip}
Use these commands to display information about the IPv6 dynamic routing protocols.
The get router info6 protocols command returns information about all of the
protocols.
Syntax
get router info6 bgp
get router info6 ospf
get router info6 protocols
get router info6 rip
offset <metric_integer> Enter the offset number to add to the metric. The
metric is the hop count. The metric_integer
range is from 1 to 16, with 16 being unreachable.
0
status {enable | disable} Enable or disable this offset list. disable
Variable Description Default
Note: All keywords are optional.
Variable Description Default
metric <metric_integer> Enter the metric value to be used for the
redistributed routes. The metric_integer range
is from 0 to 16.
0
routemap <name_str> Enter the name of the route map to use for the
redistributed routes.
Null.
status {enable | disable} Enable or disable redistributing routes. disable

Fortinet FortiGate Series Specifications

General

Brand	Fortinet
Model	FortiGate Series
Category	Firewall
Language	English