Garmin G3X Touch Pilot's Guide

Garmin G3X Touch
™
Pilot’s Guide for Certified Aircraft
190-02472-00 Rev. D
128
CNS Interface
System
Overview
Flight
InstrumentsEIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
FeaturesAFCSAnnun/AlertsAppendixIndex
Transponder
Code
Mode
Reply
Status
Touch to
Ident
Touch to
enter code or
change mode
Transponder Data Box on CNS Bar
Transponder tuning for panel mount transponders like GTX 327 (Mode C) is also
supported.
NOTE: A standalone MFD cannot support the remote transponder interface.
TRANSPONDER CODE AND MODE SELECTION
The transponder mode will automatically switch between GND Mode and ALT Mode.
Selecting a transponder code or mode:
1) Touch the transponder data box on the PFD.
Or :
Fr om the Main Menu, touch XPDR.
2) Use the keypad to enter a code and touch Enter.
Or :
Tou ch STBY, GND/ALT, or ON to change the mode, and touch Enter.

Garmin G3X Touch Specifications

General

Power Input	10-32 VDC
Touchscreen	Yes
Built-in GPS	Yes
AHRS	Yes
Air Data Computer	Yes
Aviation Database	Yes
Terrain Awareness	Yes
Operating Temperature	-20°C to +55°C
Display Size	10.6 inches
Display Type	LCD
Connectivity	Wi-Fi, Bluetooth, USB, RS-232, CAN bus
Engine Monitoring	Yes
Autopilot Compatibility	Yes
Traffic Awareness	Yes
Weather Data	Yes