Garmin G3X Touch
™
Pilot’s Guide for Certified Aircraft
190-02472-00 Rev. D 131
CNS Interface
System
Overview
Flight
Instruments EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features AFCS Annun/Alerts Appendix Index
IDENT FUNCTION
Touching IDENT sends a distinct identity indication to Air Traffic Control (ATC).
The indication distinguishes the identing transponder from all the others on the air
traffic controller’s screen. After touching IDENT the bar on the button turns green
momentarily.
ADS-B OUT
When configured with an ADS-B Out capable transponder, ‘NO ADSB’ is displayed
in yellow, in the Transponder Data Box, if the ADS-B Out broadcast has been manually
disabled or if the transponder does not have the required GPS data.
FLIGHT ID REPORTING
NOTE: The Flight ID must be configured to ‘Set By Pilot’ in Configuration
Mode for the Flight ID option to appear on the Transponder Page. Refer to
the G3X Touch Installation Manual for more information.
Entering a Flight ID:
1)
Touch the transponder data box on the CNS Bar.
Or
:
Fr
om the Main Menu, touch XPDR.
2)
Enter the Flight ID using the keypad and touch Enter.
Flight ID (Transponder Data Box)
To Next Page
Loading...
Need help?
General
