Garmin G3X Touch
™
Pilot’s Guide for Certified Aircraft
190-02472-00 Rev. D 45
System Overview
System
Overview
Flight
Instruments EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
Features AFCS Annun/Alerts Appendix Index
AIRSPACE SETUP
The Airspace Alarms Setup page allows the pilot to enable/disable airspace alarms
for the following airspace: ClassB/TMA, Class C/TCA, Class D, Restricted, MOA
(Military), Other/ADIZ, or Euro Airway.
Enabling/disabling airspace alarms:
1)
Press the MENU Key twice.
2)
Touch Setup > Airspace.
3)
Touch On or Off to enable/disable the desired airspace alarms.
BLUETOOTH SETUP
Refer to Section 8.9.
PFD SETUP
Refer to Section 1.5.
NAVIGATION SETUP
Waypoint Transition Mode can be set to 'Auto' or 'Distance'. In 'Auto' mode the
G3X Touch selects the "best" next waypoint based on the aircraft's present position.
'Distance' mode allows the pilot to enter a radius around the active leg destination so
that when the aircraft is within the entered distance, the G3X Touch transitions to the
next waypoint in the route.
Changing the waypoint transition mode:
1)
Press the MENU Key twice.
2)
Touch Setup > Navigation.
3)
Touch to display the waypoint transition mode options.
4)
When selecting Distance, touch the distance value, enter the desired
distance using the keypad, and touch Enter.
To Next Page
Loading...
Need help?
General
